error running tl in 4dvar

Issues with running 3DVAR.

error running tl in 4dvar

Postby tsrjzq » Mon Jun 06, 2011 9:53 pm

Hi, everyone

I install all the wrfvar 3.2 in pgi 9.0, openmpi, and running for testdata 3.2. The wrfvar tutorial seems not metioned tl at all. So I running the nl/tl/ad by hand. The nl runs successfully, all the auxhist2_d<domain>_<date> and nl_d01_2008-02-05_13:00:00 data exists. But when I tun the tl, some error happened, the plus.rsl.error.0000 is
taskid: 0 hostname: node1
Ntasks in X 1 , ntasks in Y 1
periodic coords 0 0 0
non periodic coords 0 0 0
WRF V2.0.3.1 MODEL
*************************************
Parent domain
ids,ide,jds,jde 1 90 1 60
ims,ime,jms,jme -3 94 -3 64
ips,ipe,jps,jpe 1 90 1 60
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
STEPRA,STEPCU,STEPBL 1 1 1
Timing for processing lateral boundary for domain 1: 0.03847 elapsed seconds.
[node1:19374] *** Process received signal ***
[node1:19374] Signal: Segmentation fault (11)
[node1:19374] Signal code: Address not mapped (1)
[node1:19374] Failing at address: 0x103
[node1:19374] [ 0] /lib64/libpthread.so.0 [0x3be3a0eb10]
[node1:19374] [ 1] ./wrfplus.exe(pgf90_trim+0x5) [0x13c9bf5]
[node1:19374] *** End of error message ***

the plus.rsl.out.0000 is

model_startTue Jun 7 10:59:48 CST 2011
taskid: 0 hostname: node1
linkedlist_initialized.
Ntasks in X 1 , ntasks in Y 1
WRF V2.0.3.1 MODEL
*************************************
Parent domain
ids,ide,jds,jde 1 90 1 60
ims,ime,jms,jme -3 94 -3 64
ips,ipe,jps,jpe 1 90 1 60
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
INPUT LANDUSE = USGS
LANDUSE TYPE = USGS FOUND 33 CATEGORIES 2 SEASONS
WATER CATEGORY = 16 SNOW CATEGORY = 24
STEPRA,STEPCU,STEPBL 1 1 1
Timing for processing lateral boundary for domain 1: 0.03847 elapsed seconds.
begin_date_string =2008-02-05_12:00:00 end_date_string =2008-02-05_18:00:00
begin_date_string =2008-02-05_12:00:00 end_date_string =2008-02-05_18:00:00
date_string( 1)=2008-02-05_12:00:00
begin_date_string =2008-02-05_12:06:00 end_date_string =2008-02-05_18:00:00
date_string( 2)=2008-02-05_12:06:00
begin_date_string =2008-02-05_12:12:00 end_date_string =2008-02-05_18:00:00
date_string( 3)=2008-02-05_12:12:00
begin_date_string =2008-02-05_12:18:00 end_date_string =2008-02-05_18:00:00
date_string( 4)=2008-02-05_12:18:00
begin_date_string =2008-02-05_12:24:00 end_date_string =2008-02-05_18:00:00
date_string( 5)=2008-02-05_12:24:00
................
................
begin_date_string =2008-02-05_17:30:00 end_date_string =2008-02-05_18:00:00
date_string( 56)=2008-02-05_17:30:00
begin_date_string =2008-02-05_17:36:00 end_date_string =2008-02-05_18:00:00
date_string( 57)=2008-02-05_17:36:00
begin_date_string =2008-02-05_17:42:00 end_date_string =2008-02-05_18:00:00
date_string( 58)=2008-02-05_17:42:00
begin_date_string =2008-02-05_17:48:00 end_date_string =2008-02-05_18:00:00
date_string( 59)=2008-02-05_17:48:00
begin_date_string =2008-02-05_17:54:00 end_date_string =2008-02-05_18:00:00
date_string( 60)=2008-02-05_17:54:00
begin_date_string

So it looks like error happens in the last 6mins. What's the reason? I believe the wrfplus.exe is ok, because in ad it can run successfully.

Thanks a lot
tsrjzq
 
Posts: 2
Joined: Mon Jun 06, 2011 9:35 pm

Re: error running tl in 4dvar

Postby tsrjzq » Wed Jun 08, 2011 9:04 pm

I find running serial wrfplus.exe in tl is ok, but the mpi version has the problem. I don't know why.
tsrjzq
 
Posts: 2
Joined: Mon Jun 06, 2011 9:35 pm


Return to Runtime Problems

Who is online

Users browsing this forum: No registered users and 0 guests