Page 1 of 1

wrf.exe problem with module_mp_etanew

PostPosted: Sun Apr 19, 2015 3:42 pm
by sunraysmile
Hi All,

I'm using WRFV3.6.1 with fnl data, everything works well till wrf.exe

It shows the fatal error:
"module_mp_etanew: error opening ETAMPNEW_DATA.expanded_rain on unit 31"

Any idea on this? Really appreciated!

Here is my namelist.input: (The same namelist.input works fine with WRFV3.2)

&time_control
run_days = 0,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 1999, 1999, 2005,
start_month = 11, 11, 10,
start_day = 26, 26, 01,
start_hour = 00, 00, 00,
start_minute = 00, 00, 00,
start_second = 00, 00, 00,
end_year = 1999, 1999, 2006,
end_month = 12, 12, 01,
end_day = 01, 01, 01,
end_hour = 00, 00, 00,
end_minute = 00, 00, 00,
end_second = 00, 00, 00,
interval_seconds = 21600
input_from_file = .true.,.true.,.true.,
history_interval = 360, 360, 360,
frames_per_outfile = 1000, 1000, 1000,
restart = .false.,
restart_interval = 14400,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
io_form_auxhist6 = 2
auxhist6_interval = 180, 180, 180,
frames_per_auxhist6 = 1000, 1000, 1000,
io_form_auxinput4 = 2
auxinput4_inname = "wrflowinp_d<domain>"
auxinput4_interval = 360, 360, 360,
/

&domains
time_step = 60,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 2,
s_we = 1, 1, 1,
e_we = 271, 121, 121,
s_sn = 1, 1, 1,
e_sn = 271, 121, 121,
s_vert = 1, 1, 1,
e_vert = 30, 30, 30,
p_top_requested = 5000,
num_metgrid_levels = 27,
eta_levels = 1.000, 0.995, 0.993, 0.989, 0.985, 0.980,
0.970, 0.960, 0.945, 0.930, 0.910, 0.890,
0.850, 0.800, 0.750, 0.700, 0.650, 0.600,
0.550, 0.500, 0.450, 0.400, 0.350, 0.300,
0.250, 0.200, 0.150, 0.100, 0.050, 0.000
num_metgrid_soil_levels = 2,
dx = 12000, 4000, 4000,
dy = 12000, 4000, 4000,
grid_id = 1, 2, 3,
parent_id = 0, 1, 2,
i_parent_start = 1, 97, 40,
j_parent_start = 1, 103, 42,
parent_grid_ratio = 1, 3, 3,
parent_time_step_ratio = 1, 3, 3,
feedback = 1,
smooth_option = 0
/

&physics
mp_physics = 5, 5, 4,
ra_lw_physics = 1, 1, 3,
ra_sw_physics = 1, 1, 3,
radt = 15, 15, 15,
sf_sfclay_physics = 91, 91, 1,
sf_surface_physics = 2, 2, 2,
bl_pbl_physics = 7, 7, 1,
bldt = 0, 0, 0,
cu_physics = 5, 5, 0,
cudt = 5, 5, 5,
isfflx = 1,
ifsnow = 0,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
num_land_cat = 28,
sst_update = 1,
sf_urban_physics = 1, 1, 1,
sf_lake_physics = 1, 1, 1,
use_lakedepth = 1, 1, 1,
maxiens = 1,
maxens = 3,
maxens2 = 3,
maxens3 = 16,
ensdim = 144,
/

&fdda
/

&dynamics
w_damping = 0,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2,
khdif = 0, 0, 0,
kvdif = 0, 0, 0,
non_hydrostatic = .true., .true., .true.,
moist_adv_opt = 1, 1, 1,
scalar_adv_opt = 1, 1, 1,
/

&bdy_control
spec_bdy_width = 10,
spec_zone = 1,
relax_zone = 9,
specified = .true., .false.,.false.,
nested = .false., .true., .true.,
/

&grib2
/

&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/

Re: wrf.exe problem with module_mp_etanew

PostPosted: Thu Apr 23, 2015 10:15 pm
by sunraysmile
Problem solved!

I forgot to link the ETAMPNEW_DATA.expanded_rain to the working directory :lol: