FATAL CALLED FROM FILE:troubles, the interpolating order is

[Scorpinok999]

Hello!
I have problem connected with real.exe running.
I see this message at the end of file:

//-------------
....
Using sfcprs to compute psfc
Converged znw(kte) should be about 0.0 = -1.6018748E-07
all_dim = 1
order = 2
i,j = 1 1
p array = 11.52501
f array = 0.0000000E+00
p target= -Infinity 6.580639 7.467942 8.035927
8.463370 8.824384 9.145589 9.422221 9.529668
9.626681 9.715111 9.796350 9.941502 10.06831
10.18090 10.28216 10.37416 10.45845 10.53624
10.60846 10.67586 10.73904 10.79851 10.85467
10.90788 10.95843 11.00659 11.05256 11.09654
11.13869 11.17916 11.21809 11.25558 11.29174
11.32666 11.36043 11.39311 11.42478 11.45550
11.48533 11.51430 11.54248
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 4144
troubles, the interpolating order is too large for this few input values
-------------------------------------------
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 4144
troubles, the interpolating order is too large for this few input values
-------------------------------------------

//-------------

I don't know how solve this problem. Try to change "namelist.input" in different ways but it doesn't help.

Here listing of my "namelist.input" :

Code: Select all

 &time_control
 run_days                            = 0,
 run_hours                           = 12,
 run_minutes                         = 0,
 run_seconds                         = 0,
 start_year                          = 2000, 2000, 2000,
 start_month                         = 07,   01,   01,
 start_day                           = 01,   24,   24,
 start_hour                          = 00,   12,   12,
 start_minute                        = 00,   00,   00,
 start_second                        = 00,   00,   00,
 end_year                            = 2000, 2000, 2000,
 end_month                           = 07,   01,   01,
 end_day                             = 03,   25,   25,
 end_hour                            = 18,   12,   12,
 end_minute                          = 00,   00,   00,
 end_second                          = 00,   00,   00,
 interval_seconds                    = 21600
 input_from_file                     = .true.,.true.,.true.,
 history_interval                    = 180,  60,   60,
 frames_per_outfile                  = 1000, 1000, 1000,
 restart                             = .false.,
 restart_interval                    = 5000,
 io_form_history                     = 2
 io_form_restart                     = 2
 io_form_input                       = 2
 io_form_boundary                    = 2
 debug_level                         = 0
 /

 &domains
 time_step                           = 180,
 time_step_fract_num                 = 0,
 time_step_fract_den                 = 1,
 max_dom                             = 1,
 e_we                                = 95,    112,   94,
 s_we                                = 1,
 e_sn                                = 125,    97,    91,
 s_sn                                = 1,
 e_vert                              = 42,    28,    28,
 s_vert                              = 1,
 p_top_requested                     = 103000,
 num_metgrid_levels                  = 1,
 num_metgrid_soil_levels             = 4,
 dx                                  = 20000, 10000,  3333.33,
 dy                                  = 20000, 10000,  3333.33,
 grid_id                             = 1,     2,     3,
 parent_id                           = 1,     1,     2,
 i_parent_start                      = 1,     31,    30,
 j_parent_start                      = 1,     17,    30,
 parent_grid_ratio                   = 1,     3,     3,
 parent_time_step_ratio              = 1,     3,     3,
 feedback                            = 1,
 smooth_option                       = 0
 /

 &physics
 mp_physics                          = 3,     3,     3,
 ra_lw_physics                       = 1,     1,     1,
 ra_sw_physics                       = 1,     1,     1,
 radt                                = 30,    30,    30,
 sf_sfclay_physics                   = 1,     1,     1,
 sf_surface_physics                  = 2,     2,     2,
 bl_pbl_physics                      = 1,     1,     1,
 bldt                                = 0,     0,     0,
 cu_physics                          = 1,     1,     0,
 cudt                                = 5,     5,     5,
 isfflx                              = 1,
 ifsnow                              = 1,
 icloud                              = 1,
 surface_input_source                = 1,
 num_soil_layers                     = 4,
 sf_urban_physics                    = 0,     0,     0,
 /

 &fdda
 /

 &dynamics
 w_damping                           = 0,
 diff_opt                            = 1,
 km_opt                              = 4,
 diff_6th_opt                        = 0,      0,      0,
 diff_6th_factor                     = 0.12,   0.12,   0.12,
 base_temp                           = 290.
 damp_opt                            = 0,
 zdamp                               = 5000.,  5000.,  5000.,
 dampcoef                            = 0.2,    0.2,    0.2
 khdif                               = 0,      0,      0,
 kvdif                               = 0,      0,      0,
 non_hydrostatic                     = .true., .true., .true.,
 moist_adv_opt                       = 1,      1,      1,     
 scalar_adv_opt                      = 1,      1,      1,     
 /

 &bdy_control
 spec_bdy_width                      = 5,
 spec_zone                           = 1,
 relax_zone                          = 4,
 specified                           = .true., .false.,.false.,
 nested                              = .false., .true., .true.,
 /

 &grib2
 /

 &namelist_quilt
 nio_tasks_per_group = 0,
 nio_groups = 1,
 /




What is most obviously reason of this problem? What should I check at first?
Please, help!

[bassline]

Did you solve this problem? I'm getting the same error!

[mpalmer]

p_top_requested = 103000,

I think your problem is there, you're telling WRF you want the top of your pressure grid at the surface. If you look at the errot it says it is having trouble calculating surface pressure. Remove that or put it to a value like 10000 or 5000 and see if WRF will run.

[Scorpinok999]

p_top_requested = 103000,

I think your problem is there, you're telling WRF you want the top of your pressure grid at the surface. If you look at the errot it says it is having trouble calculating surface pressure. Remove that or put it to a value like 10000 or 5000 and see if WRF will run.

Thank you for advice but when I changed "p_top_requested" the end of message was:

-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 872
p_top_requested < grid%p_top possible from data
-------------------------------------------
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 872
p_top_requested < grid%p_top possible from data
-------------------------------------------

[Scorpinok999]

Did you solve this problem? I'm getting the same error!

Unfortunately, I didn't.

[mpalmer]

what data are you using? and how did you extract it?

[Scorpinok999]

what data are you using? and how did you extract it?

I got data from http://apps.ecmwf.int/datasets/data/interim-full-daily/ and types of levels were "Pressure levels" and "Surface". I just choose parameters what I need and downloaded two files for both types of levels. Files format is *.grib

[starfy]

Did someone solve this problem? I'm getting the same error!

[tranduythuc]

i have the same problem, my input data is CFS REFORECAST, i just change p_top_requested, time_step, physics, check met-em data but my problem still not solve

Assume Noah LSM input
d01 1982-05-08_12:00:00 Timing for processing 0 s.
d01 1982-05-08_12:00:00 Timing for output 0 s.
d01 1982-05-08_12:00:00 Timing for loop # 511 = 0 s.
metgrid input_wrf.F first_date_input = 1982-05-08_18:00:00
metgrid input_wrf.F first_date_nml = 1982-01-01_00:00:00
d01 1982-05-08_18:00:00 Timing for input 0 s.
d01 1982-05-08_18:00:00 flag_soil_layers read from met_em file is 1
Using sfcprs2 to compute psfc
d01 1982-05-08_18:00:00 flag value of flag_qnwfa is 0
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 5228
troubles, the interpolating order is too large for this few input values
-------------------------------------------
[unset]: aborting job:
application called MPI_Abort(MPI_COMM_WORLD, 1) - process 0

[felin]

i have the same problem, my input data is CFS REFORECAST, i just change p_top_requested, time_step, physics, check met-em data but my problem still not solve

Assume Noah LSM input
d01 1982-05-08_12:00:00 Timing for processing 0 s.
d01 1982-05-08_12:00:00 Timing for output 0 s.
d01 1982-05-08_12:00:00 Timing for loop # 511 = 0 s.
metgrid input_wrf.F first_date_input = 1982-05-08_18:00:00
metgrid input_wrf.F first_date_nml = 1982-01-01_00:00:00
d01 1982-05-08_18:00:00 Timing for input 0 s.
d01 1982-05-08_18:00:00 flag_soil_layers read from met_em file is 1
Using sfcprs2 to compute psfc
d01 1982-05-08_18:00:00 flag value of flag_qnwfa is 0
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 5228
troubles, the interpolating order is too large for this few input values
-------------------------------------------
[unset]: aborting job:
application called MPI_Abort(MPI_COMM_WORLD, 1) - process 0

Maybe you need use "restart" option to simulate long time cases