Problem running with Noah-MP

Any issues with the actual running of the WRF.

Problem running with Noah-MP

Postby amethyst » Mon Aug 20, 2018 5:14 am

Hi,

I have run WRF succesfully without including sf_surface_physics, however I want to try running WRF with Noah. When I do, I encounter the following problem:

FATAL CALLED FROM FILE: <stdin> LINE: 377
STOP in Noah-MP read_mp_veg_parameters

I'm not sure where to start to reolve the problem. Does anyone have any suggestions?
Thanks!

This is my namelist.input file:

&time_control
run_days = 7,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2013, 2013, 2013, 2013,
start_month = 12, 12, 12, 12,
start_day = 31, 31, 31, 31,
start_hour = 00, 00, 00, 00,
start_minute = 00, 00, 00, 00,
start_second = 00, 00, 00, 00,
end_year = 2014, 2014, 2014, 2014,
end_month = 01, 01, 01, 01,
end_day = 07, 07, 07, 07,
end_hour = 00, 00, 00, 00,
end_minute = 00, 00, 00, 00,
end_second = 00, 00, 00, 00,
interval_seconds = 21600
input_from_file = .true.,.true.,.true.,.true.,
history_interval = 180, 180, 60, 60,
frames_per_outfile = 2, 2, 6, 6,
restart = .false.,
restart_interval = 46080,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
/

&Options for adaptive time step
use_adaptive_time_step =.true.
step_to_output_time =.true.
target_cfl = 1.2,1.2,1.2,1.2,
target_hcfl = 0.84,0.84,0.84,0.84,
max_step_increase_pct = 5,51,51,51,
starting_time_step = -1,-1,-1,-1,
starting_time_step_den = 0,
max_time_step = -1,-1,-1,-1,
max_time_step_den = 0,
min_time_step = -1,-1,-1,-1,
min_time_step_den = 0,
adaptation_domain = 1,
/

&domains
time_step = 120,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 4,
e_we = 115, 190, 283, 301,
e_sn = 115, 190, 283, 301,
e_vert = 38, 38, 38, 38,
p_top_requested = 5000,
num_metgrid_levels = 38,
num_metgrid_soil_levels = 4,
dx = 27000, 9000, 3000, 1000,
dy = 27000, 9000, 3000, 1000,
grid_id = 1, 2, 3, 4,
parent_id = 0, 1, 2, 3,
i_parent_start = 1, 26, 48, 90,
j_parent_start = 1, 26, 48, 90,
parent_grid_ratio = 1, 3, 3, 3,
parent_time_step_ratio = 1, 3, 3, 3,
feedback = 1,
smooth_option = 0
/
&physics
mp_physics = 3, 3, 3, 3,
ra_lw_physics = 1, 1, 1, 1,
ra_sw_physics = 1, 1, 1, 1,
radt = 30, 30, 30, 30,
sf_sfclay_physics = 1, 1, 1, 1,
sf_surface_physics = 4, 4, 4, 4,
bl_pbl_physics = 1, 1, 1, 1,
bldt = 0, 0, 0, 0,
cu_physics = 1, 1, 0, 0,
cudt = 5, 5, 5, 5,
isfflx = 1,
ifsnow = 0,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
sf_urban_physics = 0,
maxiens = 1,
maxens = 3,
maxens2 = 3,
maxens3 = 16,
ensdim = 144,
/

&noah_mp
dveg = 4,
opt_crs = 1,
opt_sfc = 1
opt_btr = 1,
opt_run = 3,
opt_frz = 1,
opt_inf = 1,
opt_rad = 3,
opt_alb = 2,
opt_snf = 1,
opt_tbot = 2,
opt_stc = 1,
/

&fdda
/

&dynamics
w_damping = 0,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0, 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2, 0.2,
khdif = 0, 0, 0, 0,
kvdif = 0, 0, 0, 0,
non_hydrostatic = .true., .true., .true.,.true.,
moist_adv_opt = 1, 1, 1, 1,
scalar_adv_opt = 1, 1, 1, 1,
/

&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,.false.,
nested = .false., .true., .true.,.true.,
/

&grib2
/

&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
amethyst
 
Posts: 1
Joined: Sun Aug 19, 2018 12:58 pm

Re: Problem running with Noah-MP

Postby dcvz » Mon Aug 27, 2018 1:53 am

Well, there should be additional printed output in one of your rsl files. Make sure the file 'MPTABLE.TBL' is in your run directory. A less likely cause is that your land use data is something other than USGS or MODIFIED_IGBP_MODIS_NOAH.
dcvz
 
Posts: 176
Joined: Tue Apr 15, 2008 12:02 am


Return to Runtime Problems

Who is online

Users browsing this forum: No registered users and 6 guests