WRF-Fire with a real case

Introduction to the forum

WRF-Fire with a real case

Postby Agromero » Wed Dec 09, 2015 12:27 pm

I'm working with the wildland fire module.

I run the model (V3.4) with a real case but I did not get the expected results because some additional variables in wrfout file go to zero like 'FIRE AREA, FGRNHFX or FGRNQFX'.
The WRF model with real data for weather simulations runs well but I think that the fire module doesn't run well. I write here an extract of the wrf.log:

Timing for main: time 2005-08-28_12:01:58 on domain 1: 1.35780 elapsed seconds.
SFIRE:Time 119.000 s Average wind 0.873E+00 m/s
SFIRE:Time 119.000 s Maximum wind 0.331E+01 m/s
SFIRE:Time 119.000 s Fire area 0.000E+00 m^2
SFIRE:Time 119.000 s Heat output 0.000E+00 W
SFIRE:Time 119.000 s Max heat flux 0.000E+00 W/m^2
SFIRE:Time 119.000 s Latent heat output 0.000E+00 W
SFIRE:Time 119.000 s Max latent heat flux 0.000E+00 W/m^2
Timing for main: time 2005-08-28_12:01:59 on domain 1: 1.35327 elapsed seconds.
SFIRE:Time 119.500 s Average wind 0.874E+00 m/s
SFIRE:Time 119.500 s Maximum wind 0.332E+01 m/s
SFIRE:Time 119.500 s Fire area 0.000E+00 m^2
SFIRE:Time 119.500 s Heat output 0.000E+00 W
SFIRE:Time 119.500 s Max heat flux 0.000E+00 W/m^2
SFIRE:Time 119.500 s Latent heat output 0.000E+00 W
SFIRE:Time 119.500 s Max latent heat flux 0.000E+00 W/m^2
Timing for main: time 2005-08-28_12:01:59 on domain 1: 1.35718 elapsed seconds.
SFIRE:Time 120.000 s Average wind 0.874E+00 m/s
SFIRE:Time 120.000 s Maximum wind 0.332E+01 m/s
SFIRE:Time 120.000 s Fire area 0.000E+00 m^2
SFIRE:Time 120.000 s Heat output 0.000E+00 W
SFIRE:Time 120.000 s Max heat flux 0.000E+00 W/m^2
SFIRE:Time 120.000 s Latent heat output 0.000E+00 W
SFIRE:Time 120.000 s Max latent heat flux 0.000E+00 W/m^2
Timing for main: time 2005-08-28_12:02:00 on domain 1: 1.36633 elapsed seconds.
Timing for Writing wrfout_d01_2005-08-28_12:02:00 for domain 1: 0.25402 elapsed seconds.
d01 2005-08-28_12:02:00 wrf: SUCCESS COMPLETE WRF

Any idea?

Thanks!
Agromero
 
Posts: 2
Joined: Fri Jul 17, 2015 6:40 am

Return to Welcome to the WRF User's Forum

Who is online

Users browsing this forum: No registered users and 1 guest

cron