error opening auxinput5_d01

Introduction to the forum

error opening auxinput5_d01

Postby AniLeon » Fri Feb 24, 2017 9:03 am

Hello I'm having troubles with my WRF-Chem run, the output data files doesn't show the presence of the emission source, the error reported in the rsl.error is open_aux_u : error opening auxinput5_d01_2013-08-01_00:00:00 for reading. 100 for each domain, but I don't understand why it is asking me for the auxinput5_d* because I have turned off the io_form_auxinput5 = 0 in my namelist.input
Here you are my namelist.input, I hope someone could help me. &time_control


start_year = YYYY1,YYYY1,YYYY1,YYYY1,
start_month = MM1,MM1,MM1,MM1,
start_day = DD1,DD1,DD1,DD1,
start_hour = ZZ1,ZZ1,ZZ1,ZZ1,
end_year = YYYY2,YYYY2,YYYY2,YYYY2,
end_month = MM2,MM2,MM2,MM2,
end_day = DD2,DD2,DD2,DD2,
end_hour = ZZ2,ZZ2,ZZ2,ZZ2,
interval_seconds = 21600,
input_from_file = .true.,.true.,.true.,.true.,
history_interval = 60, 60, 60, 60,
frames_per_outfile = 1000, 1000, 1000, 1000,
restart = .false.,
restart_interval = 5000,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
io_form_auxinput13 = 2
io_form_auxinput5 = 0
io_form_auxinput6 = 0,
io_form_auxinput7 = 0,
io_form_auxinput8 = 0,
io_form_auxinput12 = 0,
auxinput13_interval_m = 86400, 86400, 86400, 86400,
auxinput5_interval_m = 0, 0, 0, 0,
auxinput13_inname = 'wrfchemv_d<domain>',
debug_level = 0,
/

&domains
time_step = 135,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 3,
i_parent_start = 1, 29, 35, 39,
j_parent_start = 1, 19, 23, 21,
e_we = 99, 130, 181, 301,
e_sn = 70, 82, 115, 202,
e_vert = 50, 50, 50, 50,
eta_levels = 1.000, 0.9898, 0.9797, 0.9696, 0.9596,
0.9496, 0.9396, 0.9297, 0.9198, 0.9099,
0.9001, 0.8903, 0.8806, 0.8709, 0.861,
0.851, 0.8407, 0.83, 0.819, 0.8074,
0.7951, 0.782, 0.7679, 0.7526, 0.7359,
0.7177, 0.6977, 0.6759, 0.6523, 0.6268,
0.5997, 0.5709, 0.5408, 0.5096, 0.4776,
0.445, 0.412, 0.3789, 0.3457, 0.3126,
0.2798, 0.2473, 0.2152, 0.1835, 0.1523,
0.1206, 0.0895, 0.0591, 0.0292, 0.000
dx = 27000, 9000, 3000, 1000,
dy = 27000, 9000, 3000, 1000,
p_top_requested = 5000,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
grid_id = 1, 2, 3, 4,
parent_id = 0, 1, 2, 3,
parent_grid_ratio = 1, 3, 3, 3,
parent_time_step_ratio = 1, 3, 3, 3,
feedback = 1,
smooth_option = 0
/


&physics
mp_physics = 10, 10, 10, 10,
ra_lw_physics = 4, 4, 4, 4,
ra_sw_physics = 4, 4, 4, 4,
radt = 27, 27, 27, 27,
sf_sfclay_physics = 2, 2, 2, 2,
sf_surface_physics = 2, 2, 2, 2,
bl_pbl_physics = 2, 2, 2, 2,
bldt = 0, 0, 0, 0,
cu_physics = 3, 3, 3, 0,
cudt = 1, 1, 1, 1,
sf_urban_physics = 0, 0, 0, 0,
progn = 0, 0, 0, 0,
cu_diag = 1, 1, 1, 0,
cu_rad_feedback = .true., .true., .true., .false.,
cugd_avedx = 1,
mp_zero_out = 2,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
/

&fdda
/

&dynamics
w_damping = 1,
rk_ord = 3,
diff_opt = 1, 1, 1, 1,
km_opt = 4, 4, 4, 4,
diff_6th_opt = 0, 0, 0, 0,
zdamp = 5000., 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2, 0.2,
khdif = 0, 0, 0, 0,
kvdif = 0, 0, 0, 0,
tracer_opt = 0, 0, 0, 0,
moist_adv_opt = 2, 2, 2, 2,
scalar_adv_opt = 2, 2, 2, 2,
chem_adv_opt = 2, 2, 2, 2,
tke_adv_opt = 2, 2, 2, 2,
non_hydrostatic = .true., .true., .true., .true.,
base_temp = 290.
damp_opt = 0,
/

&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,.false.,
nested = .false., .true., .true., .true.,
/

&grib2
/

&chem
chem_opt = 400, 400, 400, 400,
chem_in_opt = 0, 0, 0, 0,
chemdiag = 0, 0, 0, 0,
emiss_opt = 0, 0, 0, 0,
emiss_inpt_opt = 0, 0, 0, 0,
gas_drydep_opt = 0, 0, 0, 0,
aer_drydep_opt = 1, 1, 1, 1,
bio_emiss_opt = 0, 0, 0, 0,
biomass_burn_opt = 0, 0, 0, 0,
emiss_opt_vol = 1, 1, 1, 1,
aircraft_emiss_opt = 0, 0, 0, 0,
gaschem_onoff = 0, 0, 0, 0,
aerchem_onoff = 0, 0, 0, 0,
wetscav_onoff = 0, 0, 0, 0,
cldchem_onoff = 0, 0, 0, 0,
vertmix_onoff = 1, 1, 1, 1,
chem_conv_tr = 1, 1, 1, 0,
conv_tr_wetscav = 1, 1, 1, 1,
plumerisefire_frq = 30, 30, 30, 30,
aer_ra_feedback = 0, 0, 0, 0,
gas_bc_opt = 1, 1, 1, 1,
gas_ic_opt = 1, 1, 1, 1,
aer_bc_opt = 1, 1, 1, 1,
aer_ic_opt = 1, 1, 1, 1,
have_bcs_chem = .false., .false., .false., .false.,
have_bcs_tracer = .false., .false., .false., .false.,
io_style_emissions = 1,
chemdt = 0,
kemit = 1,
dust_opt = 0,
seas_opt = 0,
phot_opt = 0,
dmsemis_opt = 0,
/

&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
AniLeon
 
Posts: 1
Joined: Tue Feb 21, 2017 9:15 am

Return to Welcome to the WRF User's Forum

Who is online

Users browsing this forum: No registered users and 5 guests