Error in convert_emiss.exe

Any issues with running WRF Chemistry

Error in convert_emiss.exe

Postby ozrr » Sat Jun 25, 2016 2:24 pm

Hi, I'm using WRF-Chem version 3.8 and PREP-CHEM-SRC-1.5.
I made antropogeinc emission input by prep_chem_sources_RADM_WRF_FIM_.exe.
The namelist is below.

Code: Select all
 $RP_INPUT
!#################################################################
!  CCATT-BRAMS/MCGA-CPTEC/WRF-Chem/FIM-Chem emission models CPTEC/INPE
!  version 1.5: Mar 2015
!  contact: gmai@cptec.inpe.br   - http://meioambiente.cptec.inpe.br
!#################################################################


!---------------- grid_type of the grid output
   grid_type= 'lambert',
   rams_anal_prefix = '../ANL/OPQUE',
!---------------- date of emission
    ihour=00,
    iday=13,
    imon=08,
    iyear=2015,

 !---------------- select the sources datasets to be used
   use_retro=1,  ! 1 = yes, 0 = not
   retro_data_dir='./datain/Emission_data/RETRO/anthro',

   use_edgar =0,  ! 0 - not,
                  ! 1 - Version 3,
                  ! 2 - Version 4 for some species
                  ! 3 - Version HTAP

   edgar_data_dir='./datain/Emission_data/EDGAR/anthro',

   use_gocart=0,
   gocart_data_dir='./datain/Emission_data/GOCART/emissions',

   use_streets =0,
   streets_data_dir='./datain/Emission_data/STREETS',

   use_seac4rs =0,
   seac4rs_data_dir='./datain/Emission_data/SEAC4RS',


   use_fwbawb =0,
   fwbawb_data_dir ='./datain/Emission_data/Emissions_Yevich_Logan',

   use_bioge =1, ! 1 - geia, 2 - megan
   ! ######
   ! # BIOGENIC = 1
   bioge_data_dir ='./datain/Emission_data/biogenic_emissions',
   ! # MEGAN = 2
   ! ######
   !bioge_data_dir='./datain/Emission_data/MEGAN/2000',
   ! ######

   use_gfedv2=0,
   gfedv2_data_dir='./datain/Emission_data/GFEDv2-8days',

   use_bbem=0,
   use_bbem_plumerise=0,

!--------------------------------------------------------------------------------------------------

!---------------- if  the merging of gfedv2 with bbem is desired (=1, yes, 0 = no)
   merge_GFEDv2_bbem =0,

!---------------- Fire product for BBBEM/BBBEM-plumerise emission models
   bbem_wfabba_data_dir   ='./datain/Emission_data/fires_data/WF_ABBA_v60_saulo/filt/',
   bbem_modis_data_dir    ='./datain/Emission_data/fires_data/MODIS/',
   bbem_inpe_data_dir     ='./datain/Emission_data/fires_data/DSA/',
   bbem_extra_data_dir    ='NONE',

!---------------- veg type data set (dir + prefix)
   veg_type_data_dir      ='./datain/surface_data/GL_IGBP_MODIS_INPE/MODIS',
!   veg_type_data_dir      ='./datain/surface_data/GL_IGBP_INPE_39classes/IGBP',


!---------------- vcf type data set (dir + prefix)
  use_vcf = 0,
  vcf_type_data_dir      ='./datain/surface_data/VCF/data_out/2005/VCF',
!---------------- olson data set (dir + prefix)
  olson_data_dir      ='./datain/Emission_data/OLSON2/OLSON',



!---------------- carbon density data set (dir + prefix)

   carbon_density_data_dir='./datain/surface_data/GL_OGE_INPE/OGE',

   fuel_data_dir      ='./datain/Emission_data/Carbon_density_Saatchi/amazon_biomass_final.gra',


!---------------- gocart background
   use_gocart_bg=0,
   gocart_bg_data_dir='./datain/Emission_data/GOCART',

!---------------- volcanoes emissions
   use_volcanoes =0,
   volcano_index =1143, !REDOUBT

   use_these_values='NONE',
! define a text file for using external values for INJ_HEIGHT, DURATION,
! MASS ASH (units are meters - seconds - kilograms) and the format for
   begin_eruption='201303280000',  !begin time UTC of eruption YYYYMMDDhhmm

!---------------- degassing volcanoes emissions
   use_degass_volcanoes =0,
   degass_volc_data_dir ='./datain/Emission_data/VOLC_SO2',

!---------------- user specific  emissions directory
!---------------- Update for South America megacities
   user_data_dir='NONE',


!--------------------------------------------------------------------------------------------------
   pond=1,   ! mad/mfa  0 -> molar mass weighted
             !          1 -> Reactivity weighted

!---------------- for grid type 'll' or 'gg' only
   grid_resolucao_lon=1.0,
   grid_resolucao_lat=1.0,

   nlat=320,          ! if gg (only global grid)
   lon_beg   = -180., ! (-180.:+180.) long-begin of the output file
   lat_beg   =  -90., ! ( -90.:+90. ) lat -begin of the output file
   delta_lon =  360, ! total long extension of the domain (360 for global)
   delta_lat =  180, ! total lat  extension of the domain (180 for global)

!---------------- For regional grids (polar or lambert)

   NGRIDS   = 3,            ! Number of grids to run

   NNXP     = 215,274,100,        ! Number of x gridpoints
   NNYP     = 181,145,100,        ! Number of y gridpoints
   NXTNEST  = 0,1,2               ! Grid number which is the next coarser grid
   DELTAX   = 9000.,
   DELTAY   = 9000.,              ! X and Y grid spacing

   ! Nest ratios between this grid and the next coarser grid.
   NSTRATX  = 1,3,3,             ! x-direction
   NSTRATY  = 1,3,3,             ! y-direction

   NINEST = 1,16,10,          ! Grid point on the next coarser
   NJNEST = 1,93,89,          !  nest where the lower southwest
                              !  corner of this nest will start.
                              !  If NINEST or NJNEST = 0, use CENTLAT/LON
   POLELAT  = 36.094,         ! If polar, latitude/longitude of pole point
   POLELON  = 127.169,         ! If lambert, lat/lon of grid origin (x=y=0.)

   STDLAT1  = 30.,           ! If polar for BRAMS, use 90.0 in STDLAT2
   STDLAT2  = 60.,         ! If lambert, standard latitudes of projection
                            !(truelat2/truelat1 from namelist.wps, STDLAT1 < STDLAT2)
                            ! If mercator STDLAT1 = 1st true latitude
   CENTLAT  = 36.094,
   CENTLON  = 127.169,



!---------------- model output domain for each grid (only set up for rams)
   lati =  -90.,  -90.,   -90.,
   latf =  +90.,  +90.,   +90.,
   loni = -180., -180.,  -180.,
   lonf =  180.,  180.,   180.,

!---------------- project rams grid (polar sterogr) to lat/lon: 'YES' or 'NOT'
   proj_to_ll='YES',

!---------------- output file prefix (may include directory other than the current)
   chem_out_prefix = 'new_emiss',
   chem_out_format = 'vfm',
!---------------- convert to WRF/CHEM (yes,not)
  special_output_to_wrf = 'YES',

$END



I made emission input files succesfully and I ran real.exe using the namelist.input below.

Code: Select all
&time_control
 run_days                            = 0,
 run_hours                           = 120,
 run_minutes                         = 0,
 run_seconds                         = 0,
 start_year                          = 2015, 2015, 2015,
 start_month                         = 08,   08,   08,
 start_day                           = 13,   13,   13,
 start_hour                          = 00,   00,   00,
 start_minute                        = 00,   00,   00,
 start_second                        = 00,   00,   00,
 end_year                            = 2015, 2015, 2015,
 end_month                           = 08,   08,   08,
 end_day                             = 17,   17,   17,
 end_hour                            = 18,   18,   18,
 end_minute                          = 00,   00,   00,
 end_second                          = 00,   00,   00,
 interval_seconds                    = 10800
 input_from_file                     = .true.,.true.,.true.,
 history_interval                    = 720,  60,   60,
 frames_per_outfile                  = 1,    1,    1,
 restart                             = .false.,
 restart_interval                    = 5000,
 io_form_history                     = 2
 io_form_restart                     = 2
 io_form_input                       = 2
 io_form_boundary                    = 2
 auxinput1_inname                    = 'met_em.d<domain>.<date>',
 auxinput5_inname                    = 'wrfchemi_d<domain>_<date>',
 auxinput8_inname                    = 'wrfchemi_gocart_bg_d<domain>',
 io_form_auxinput2                    = 2
 io_form_auxinput5                    = 2
 io_form_auxinput8                    = 2
 auxinput5_interval_m                = 720
 auxinput8_interval_m                = 720
 frames_per_auxinput5                = 1
 frames_per_auxinput8                = 1
 debug_level                         = 0
 /

 &domains
 time_step                           = 54,
 time_step_fract_num                 = 0,
 time_step_fract_den                 = 1,
 max_dom                             = 3,
 e_we                                = 215,   274,   100,
 e_sn                                = 181,   145,   100,
 e_vert                              = 30,    30,    30,
 p_top_requested                     = 5000,
 num_metgrid_levels                  = 27,
 num_metgrid_soil_levels             = 4,
 dx                                  = 9000, 3000,  1000,
 dy                                  = 9000, 3000,  1000,
 grid_id                             = 1,     2,     3,
 parent_id                           = 0,     1,     2,
 i_parent_start                      = 1,     16,    10,
 j_parent_start                      = 1,     93,    89,
 parent_grid_ratio                   = 1,     3,     3,
 parent_time_step_ratio              = 1,     3,     3,
 feedback                            = 1,
 smooth_option                       = 0
 /

 &physics
 mp_physics                          = 6,     6,     6,
 ra_lw_physics                       = 1,     1,     1,
 ra_sw_physics                       = 1,     1,     1,
 radt                                = 9,     3,     1,
 sf_sfclay_physics                   = 1,     1,     1,
 sf_surface_physics                  = 2,     2,     2,
 bl_pbl_physics                      = 1,     1,     1,
 bldt                                = 0,     0,     0,
 cu_physics                          = 0,     0,     0,
 cudt                                = 5,     5,     5,
 isfflx                              = 1,
 ifsnow                              = 1,
 icloud                              = 1,
 surface_input_source                = 1,
 num_soil_layers                     = 4,
 num_land_cat                        = 21,
 sf_urban_physics                    = 0,     0,     0,
 cu_diag                             = 0,     0,     0,
 /

 &fdda
 /

 &dynamics
 w_damping                           = 0,
 diff_opt                            = 1,      1,      1,
 km_opt                              = 4,      4,      4,
 diff_6th_opt                        = 0,      0,      0,
 diff_6th_factor                     = 0.12,   0.12,   0.12,
 base_temp                           = 290.
 damp_opt                            = 0,
 zdamp                               = 5000.,  5000.,  5000.,
 dampcoef                            = 0.2,    0.2,    0.2
 khdif                               = 0,      0,      0,
 kvdif                               = 0,      0,      0,
 non_hydrostatic                     = .true., .true., .true.,
 moist_adv_opt                       = 1,      1,      1,
 scalar_adv_opt                      = 1,      1,      1,
 /

 &bdy_control
 spec_bdy_width                      = 5,
 spec_zone                           = 1,
 relax_zone                          = 4,
 specified                           = .true., .false.,.false.,
 nested                              = .false., .true., .true.,
 /

 &grib2
 /

 &chem
 chem_opt                            = 0,
 emiss_opt                           = 2,
 chem_in_opt                         = 1,
 bio_emiss_opt                       = 1,
 chem_conv_tr                        = 0,
 /

 &namelist_quilt
 nio_tasks_per_group = 0,
 nio_groups = 1,
 /



Also I ran real.exe succesfully.

I linked the emission files in test/em_real directory.

ln -sf ../../chem/PREP-CHEM-SRC-1.5/bin/new_emiss-T-2015-08-13-000000-g1-ab.bin wrfem_00to12z_d01
ln -sf ../../chem/PREP-CHEM-SRC-1.5/bin/new_emiss-T-2015-08-13-000000-g1-bb.bin emissfire_d01



But when I run convert_emiss.exe, I've got error.
The namelist.input for convert_emiss.exe and the rsl.error.0000 file are below.

Code: Select all
&time_control
 run_days                            = 0,
 run_hours                           = 12,
 run_minutes                         = 0,
 run_seconds                         = 0,
 start_year                          = 2015, 2015, 2015,
 start_month                         = 08,   08,   08,
 start_day                           = 13,   13,   13,
 start_hour                          = 00,   00,   00,
 start_minute                        = 00,   00,   00,
 start_second                        = 00,   00,   00,
 end_year                            = 2015, 2015, 2015,
 end_month                           = 08,   08,   08,
 end_day                             = 13,   17,   17,
 end_hour                            = 12,   18,   18,
 end_minute                          = 00,   00,   00,
 end_second                          = 00,   00,   00,
 interval_seconds                    = 10800
 input_from_file                     = .true.,.true.,.true.,
 history_interval                    = 720,  60,   60,
 frames_per_outfile                  = 1,    1,    1,
 restart                             = .false.,
 restart_interval                    = 5000,
 io_form_history                     = 2
 io_form_restart                     = 2
 io_form_input                       = 2
 io_form_boundary                    = 2
 auxinput1_inname                    = 'met_em.d<domain>.<date>',
 auxinput5_inname                    = 'wrfchemi_d<domain>_<date>',
 auxinput8_inname                    = 'wrfchemi_gocart_bg_d<domain>',
 io_form_auxinput2                    = 2
 io_form_auxinput5                    = 2
 io_form_auxinput8                    = 2
 auxinput5_interval_m                = 720
 auxinput8_interval_m                = 720
 frames_per_auxinput5                = 1
 frames_per_auxinput8                = 1
 debug_level                         = 0
 /

 &domains
 time_step                           = 54,
 time_step_fract_num                 = 0,
 time_step_fract_den                 = 1,
 max_dom                             = 1,
 e_we                                = 215,   274,   100,
 e_sn                                = 181,   145,   100,
 e_vert                              = 30,    30,    30,
 p_top_requested                     = 5000,
 num_metgrid_levels                  = 27,
 num_metgrid_soil_levels             = 4,
 dx                                  = 9000, 3000,  1000,
 dy                                  = 9000, 3000,  1000,
 grid_id                             = 1,     2,     3,
 parent_id                           = 0,     1,     2,
 i_parent_start                      = 1,     16,    10,
 j_parent_start                      = 1,     93,    89,
 parent_grid_ratio                   = 1,     3,     3,
 parent_time_step_ratio              = 1,     3,     3,
 feedback                            = 1,
 smooth_option                       = 0
 /

 &physics
 mp_physics                          = 6,     6,     6,
 ra_lw_physics                       = 1,     1,     1,
 ra_sw_physics                       = 1,     1,     1,
 radt                                = 9,     3,     1,
 sf_sfclay_physics                   = 1,     1,     1,
 sf_surface_physics                  = 2,     2,     2,
 bl_pbl_physics                      = 1,     1,     1,
 bldt                                = 0,     0,     0,
 cu_physics                          = 0,     0,     0,
 cudt                                = 5,     5,     5,
 isfflx                              = 1,
 ifsnow                              = 1,
 icloud                              = 1,
 surface_input_source                = 1,
 num_soil_layers                     = 4,
 num_land_cat                        = 21,
 sf_urban_physics                    = 0,     0,     0,
 cu_diag                             = 0,     0,     0,
 /

 &fdda
 /

 &dynamics
 w_damping                           = 0,
 diff_opt                            = 1,      1,      1,
 km_opt                              = 4,      4,      4,
 diff_6th_opt                        = 0,      0,      0,
 diff_6th_factor                     = 0.12,   0.12,   0.12,
 base_temp                           = 290.
 damp_opt                            = 0,
 zdamp                               = 5000.,  5000.,  5000.,
 dampcoef                            = 0.2,    0.2,    0.2
 khdif                               = 0,      0,      0,
 kvdif                               = 0,      0,      0,
 non_hydrostatic                     = .true., .true., .true.,
 moist_adv_opt                       = 1,      1,      1,
 scalar_adv_opt                      = 1,      1,      1,
 /

 &bdy_control
 spec_bdy_width                      = 5,
 spec_zone                           = 1,
 relax_zone                          = 4,
 specified                           = .true., .false.,.false.,
 nested                              = .false., .true., .true.,
 /

 &grib2
 /

 &chem
 chem_opt                            = 1,
 emiss_opt                           = 2,
 chem_in_opt                         = 1,
 bio_emiss_opt                       = 1,
 chem_conv_tr                        = 0,
 /

 &namelist_quilt
 nio_tasks_per_group = 0,
 nio_groups = 1,
 /



Code: Select all
taskid: 0 hostname: nid00040
 module_io_quilt_old.F        2931 T
 Ntasks in X            4, ntasks in Y            4
WRF-CHEM V3.8 EMISSIONS PREPROCESSOR
 *************************************
 Parent domain
 ids,ide,jds,jde            1         215           1         181
 ims,ime,jms,jme           -4          61          -4          52
 ips,ipe,jps,jpe            1          54           1          45
 *************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
   alloc_space_field: domain            1,              521620796 bytes allocated
 open file wrfinput_d01
  med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain        1:    1.06993 elapsed seconds
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
 LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND          33 CATEGORIES           2 SEASONS WATER CATEGORY =           17 SNOW CATEGORY =           15
INITIALIZE THREE Noah LSM RELATED TABLES
Skipping over LUTYPE = USGS
 LANDUSE TYPE = MODIFIED_IGBP_MODIS_NOAH FOUND          20 CATEGORIES
 INPUT SOIL TEXTURE CLASSIFICATION = STAS
 SOIL TEXTURE CLASSIFICATION = STAS FOUND          19 CATEGORIES
*********************************************************************
*             PROGRAM:WRF/CHEM V3.8 MODEL
*                                                                   *
*    PLEASE REPORT ANY BUGS TO WRF/CHEM HELP at                     *
*                                                                   *
*              wrfchemhelp.gsd@noaa.gov                             *
*                                                                   *
*********************************************************************
   past opening wrfinput_d01
Time period #   1 to process = 2015-08-13_00:00:00
Time period #   2 to process = 2015-08-13_12:00:00
Total analysis times to input =    2
Total number of times to input =    2    2
 Number of emissions:         29
 EMISSIONS INPUT FILE TIME PERIOD (GMT):       -1 TO        0
forrtl: severe (67): input statement requires too much data, unit 91, file /home/WRFV3.8-chem/WRFV3/test/em_real/wrfem_00to12z_d01
Image              PC                Routine            Line        Source
convert_emiss.exe  0000000003C78746  Unknown               Unknown  Unknown
convert_emiss.exe  0000000003C9F148  Unknown               Unknown  Unknown
convert_emiss.exe  0000000003C9CE56  Unknown               Unknown  Unknown
convert_emiss.exe  000000000040D334  Unknown               Unknown  Unknown
convert_emiss.exe  000000000040133E  Unknown               Unknown  Unknown
convert_emiss.exe  0000000003D65231  Unknown               Unknown  Unknown
convert_emiss.exe  00000000004011B5  Unknown               Unknown  Unknown




In this case the wrf-chem tutorial recommends to check these :
* have a bad link,

* a zero-size file, or

* a missing the GOCART backgroud file.

But I cannot find any problems with these.


I think the namelist.input for convert_emiss.exe needs more information in &chem section,
but I have no idea how I add or modify the namelist.input.


Please answer if you have any idea or comments.
ozrr
 
Posts: 18
Joined: Fri May 22, 2015 12:43 am

Error in running prep chem sources

Postby sunnykant » Fri Dec 30, 2016 8:33 am

Hello,
I am try to running prep_chem_sources.exe. The namelist.inp is given below:

$RP_INPUT
!#################################################################
! CCATT-BRAMS/MCGA-CPTEC/WRF-Chem/FIM-Chem emission models CPTEC/INPE
! version 1.3: May 2012
! contact: gmai@cptec.inpe.br - http://meioambiente.cptec.inpe.br
!#################################################################


!---------------- grid_type of the grid output
!grid_type= 'll',
grid_type= 'mercator',
rams_anal_prefix = '../ANL/OPQUE',
!---------------- date of emission
ihour=00,
iday=16,
imon=02,
iyear=2015,

!---------------- select the sources datasets to be used
use_retro=1, ! 1 = yes, 0 = not
!retro_data_dir='./datain/EMISSION_DATA/RETRO/anthro',
retro_data_dir='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/Emission_data/RETRO/anthro',
use_edgar =0, ! 0 - not,
! 1 - Version 3,
! 2 - Version 4 for some species
! 3 - Version HTAP

!edgar_data_dir='./datain/EMISSION_DATA/EDGAR/anthro/hdf',
edgar_data_dir='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/Emission_data/EDGARV4',

use_gocart=1,
!gocart_data_dir='./datain/EMISSION_DATA/GOCART/emissions',
gocart_data_dir='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/Emission_data/GOCART/emissions',

use_streets =0,
streets_data_dir='./datain/EMISSION_DATA/STREETS',

use_seac4rs =0,
seac4rs_data_dir='./datain/EMISSION_DATA/SEAC4RS',

use_fwbawb =0,
!fwbawb_data_dir ='./datain/EMISSION_DATA/Emissions_Yevich_Logan',
fwbawb_data_dir ='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/Emission_data/Emissions_Yevich_Logan',

use_bioge =1, ! 1 - geia, 2 - megan
! ######
! # BIOGENIC = 1
!bioge_data_dir ='./datain/EMISSION_DATA/biogenic_emissions',
! # MEGAN = 2
! ######
!bioge_data_dir='./datain/EMISSION_DATA/MEGAN/2000',
! ######
bioge_data_dir='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/Emission_data/biogenic_emissions',

use_gfedv2=0,
!gfedv2_data_dir='./datain/EMISSION_DATA/GFEDv2-8days',
gfedv2_data_dir='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/Emission_data/GFEDv2-8days',

use_bbem=0,
use_bbem_plumerise=0,

!--------------------------------------------------------------------------------------------------

!---------------- if the merging of gfedv2 with bbem is desired (=1, yes, 0 = no)
merge_GFEDv2_bbem =0,

!---------------- Fire product for BBBEM/BBBEM-plumerise emission models
!bbem_wfabba_data_dir ='./datain/EMISSION_DATA/FIRES/GOES/f',
!bbem_modis_data_dir ='./datain/EMISSION_DATA/FIRES/MODIS/Fires',
!bbem_inpe_data_dir ='./datain/EMISSION_DATA/FIRES/DSA/Focos',
!bbem_extra_data_dir ='NONE',
bbem_wfabba_data_dir ='/home/maslab-1/data/wrfchemData/Data_WRFChem/Fire_data/WF_ABBA',
bbem_modis_data_dir ='/home/maslab-1/data/wrfchemData/Data_WRFChem/Fire_data/MODIS/Fires.',
bbem_inpe_data_dir ='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/Emission_data/fires_data/DSA/Focos',
bbem_extra_data_dir ='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/Emission_data/fires_data/BLMALASKA/current.dat',
!---------------- veg type data set (dir + prefix)
!veg_type_data_dir='./datain/SURFACE_DATA/GL_IGBP_INPE_39classes/IGBP',
veg_type_data_dir='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/surface_data/GL_IGBP_MODIS_INPE/MODIS',

!---------------- vcf type data set (dir + prefix)
use_vcf = 0,
vcf_type_data_dir ='./datain/SURFACE_DATA/VCF/data_out/2005/VCF',
!---------------- olson data set (dir + prefix)
!olson_data_dir='./datain/EMISSION_DATA/OLSON2/OLSON',
olson_data_dir='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/Emission_data/OLSON2/OLSON',

!---------------- carbon density data set (dir + prefix)

!carbon_density_data_dir='./datain/SURFACE_DATA/GL_OGE_INPE/OGE',
carbon_density_data_dir='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/surface_data/GL_OGE_INPE/OGE',

!fuel_data_dir='./datain/EMISSION_DATA/Carbon_density_Saatchi/amazon_biomass_final.gra',
fuel_data_dir='',

!---------------- gocart background
use_gocart_bg=1,
!gocart_bg_data_dir='./datain/EMISSION_DATA/GOCART',
gocart_bg_data_dir='/home/maslab-1/data/wrfchemData/Data_WRFChem/Global_emissions_v3/Emission_data/GOCART',
!---------------- volcanoes emissions
use_volcanoes =0,
!volcano_index =1143, !REDOUBT
volcano_index =0, !REDOUBT
use_these_values='NONE',
! define a text file for using external values for INJ_HEIGHT, DURATION,
! MASS ASH (units are meters - seconds - kilograms) and the format for
begin_eruption='201303280000', !begin time UTC of eruption YYYYMMDDhhmm

!---------------- degassing volcanoes emissions
use_degass_volcanoes =0,
!degass_volc_data_dir ='./datain/EMISSION_DATA/VOLC_SO2',
degass_volc_data_dir ='',
!---------------- user specific emissions directory
!---------------- Update for South America megacities
user_data_dir='NONE',


!--------------------------------------------------------------------------------------------------
pond=1, ! mad/mfa 0 -> molar mass weighted
! 1 -> Reactivity weighted

!---------------- for grid type 'll' or 'gg' only
grid_resolucao_lon=1.0,
grid_resolucao_lat=1.0,

nlat=320, ! if gg (only global grid)
lon_beg = -180., ! (-180.:+180.) long-begin of the output file
lat_beg = -90., ! ( -90.:+90. ) lat -begin of the output file
delta_lon = 360, ! total long extension of the domain (360 for global)
delta_lat = 180, ! total lat extension of the domain (180 for global)

!---------------- For regional grids (polar or lambert)

NGRIDS = 3, ! Number of grids to run

!NNXP = 150,50,86,46, ! Number of x gridpoints
!NNYP = 90,50,74,46, ! Number of y gridpoints
!NXTNEST = 0,1,1,1, ! Grid number which is the next coarser grid
!DELTAX = 111487.,
!DELTAY = 111487., ! X and Y grid spacing

NNXP = 88,115,62, ! Number of x gridpoints for e_we
NNYP = 98,121,61, ! Number of y gridpoints for e_sn
NXTNEST = 0,1,2, ! Grid number which is the next coarser grid
DELTAX = 100000.,
DELTAY = 100000., ! X and Y grid spacing

! Nest ratios between this grid and the next coarser grid.
!NSTRATX = 1,2,3,4, ! x-direction
!NSTRATY = 1,2,3,4, ! y-direction

NSTRATX = 1,3,3, ! x-direction
NSTRATY = 1,3,3, ! y-direction

!NINEST = 1,10,0,0, ! Grid point on the next coarser
!NJNEST = 1,10,0,0, ! nest where the lower southwest
! corner of this nest will start.
! If NINEST or NJNEST = 0, use CENTLAT/LON
NINEST = 1,20,50, ! Grid point on the next coarser
NJNEST = 1,25,62, ! nest where the lower southwest

!POLELAT = 85.0, !-89.99, ! If polar, latitude/longitude of pole point
!POLELON = 0., ! If lambert, lat/lon of grid origin (x=y=0.)

POLELAT = 20.18., !-89.99, ! If polar, latitude/longitude of pole point
POLELON = 85.50., ! If lambert, lat/lon of grid origin (x=y=0.)

!STDLAT1 = 0., ! If polar for BRAMS, use 90.0 in STDLAT2
!STDLAT2 = -60., ! If lambert, standard latitudes of projection
!(truelat2/truelat1 from namelist.wps, STDLAT1 < STDLAT2)
! If mercator STDLAT1 = 1st true latitude
STDLAT1 = 25.0., ! If polar for BRAMS, use 90.0 in STDLAT2
STDLAT2 = 10.0., ! If lambert, standard latitudes of projection

!CENTLAT = 85.,!-89.99, -23., 27.5, 27.5,
!CENTLON = 0., -46.,-80.5, -80.5,

CENTLAT = 20.18., 20.18., 20.18., !ref_lat/ref_lon from namelist.wps
CENTLON = 85.50., 85.50., 85.50.,

!---------------- model output domain for each grid (only set up for rams)
lati = -90., -90., -90.,
latf = +90., +90., +90.,
loni = -180., -180., -180.,
lonf = 180., 180., 180.,

!---------------- project rams grid (polar sterogr) to lat/lon: 'YES' or 'NOT'
proj_to_ll='YES',
!proj_to_ll='NO',
!---------------- output file prefix (may include directory other than the current)
!chem_out_prefix = 'matrixfire',
chem_out_prefix = 'Emission',
chem_out_format = 'vfm',
!---------------- convert to WRF/CHEM (yes,not)
special_output_to_wrf = 'YES',

$END

After running of prep_chem_sources.exe. I am getting this error

Opening prep_chem_sources.inp file
At line 99 of file prep_chem_sources.F90 (unit = 5, file = 'prep_chem_sources.inp')
Fortran runtime error: Cannot match namelist object name .

Actually i don't know what type of error is this. Anyone can help me to solve this problem.

Regards
Sunny
sunnykant
 
Posts: 2
Joined: Tue Dec 27, 2016 12:53 pm

Re: Error in convert_emiss.exe

Postby arianna.v » Tue Feb 28, 2017 9:18 am

Did anyone find the solution?

If yes please post it because it's quite hard to find it across internet.. and the guides does not help at all.

Thank you!
arianna.v
 
Posts: 6
Joined: Mon Feb 20, 2017 3:09 pm


Return to Runtime Problems

Who is online

Users browsing this forum: No registered users and 1 guest