Could not find matching time in input file wrffirechemi**

Any issues with running WRF Chemistry

Could not find matching time in input file wrffirechemi**

Postby Berny Chaimite » Fri Mar 31, 2017 7:48 pm

Greetings everyone!

After running real.exe successfully, I ran the wrf.exe, then finished, and went to see the files rsl.out.000 * I found this error:

------------------ FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 941
... Could not find matching time in input file wrffirechemi_d02_2016-08-15_01:00:00


My namelist is like this:

&time_control
run_days = 0,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2016, 2016,
start_month = 08, 08,
start_day = 15, 15,
start_hour = 00, 00,
start_minute = 00, 00,
start_second = 00, 00,
end_year = 2016, 2016,
end_month = 08, 08,
end_day = 20, 20,
end_hour = 21, 21,
end_minute = 00, 00,
end_second = 00, 00,
interval_seconds = 10800,
input_from_file = .true., .true.,
history_interval = 180, 60,
frames_per_outfile = 1000, 1000,
restart = .false.,
restart_interval = 5000,
io_form_history = 2,
io_form_restart = 2,
io_form_input = 2,
io_form_boundary = 2,
auxinput7_inname = 'wrffirechemi_d<domain>_<date>',
auxinput7_interval_m = 60, 60, 60,
io_form_auxinput7 = 2,
frames_per_auxinput7 = 1, 1, 1,
debug_level = 1000,
/

&domains
time_step = 54,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 2,
e_we = 195, 115,
e_sn = 138, 70,
e_vert = 30, 30,
p_top_requested = 5000,
num_metgrid_levels = 32,
num_metgrid_soil_levels = 4,
dx = 9000, 3000,
dy = 9000, 3000,
grid_id = 1, 2,
parent_id = 1, 1,
i_parent_start = 1, 99,
j_parent_start = 1, 72,
parent_grid_ratio = 1, 3,
parent_time_step_ratio = 1, 3,
feedback = 1,
smooth_option = 0,
max_ts_locs = 40,
ts_buf_size = 1000,
/

&physics
mp_physics = 10, 10,
progn = 1, 1,
ra_lw_physics = 1, 1,
ra_sw_physics = 1, 1,
radt = 10, 10,
sf_sfclay_physics = 2, 2,
sf_surface_physics = 2, 2,
bl_pbl_physics = 2, 2,
bldt = 0, 0,
cu_physics = 5, 5,
cu_diag = 1, 1,
cudt = 0, 0,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 3,
num_soil_layers = 4,
num_land_cat = 21,
sf_urban_physics = 0, 0,
maxiens = 1,
maxens = 3,
maxens2 = 3,
maxens3 = 16,
ensdim = 144,
cu_rad_feedback = .true.,
/

&fdda
/

&dynamics
w_damping = 0,
diff_opt = 1, 1,
km_opt = 4, 4,
diff_6th_opt = 0, 0,
diff_6th_factor = 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000.,
dampcoef = 0.2, 0.2,
khdif = 0, 0,
kvdif = 0, 0,
non_hydrostatic = .true., .true.,
moist_adv_opt = 2, 2,
scalar_adv_opt = 2, 2,
chem_adv_opt = 2, 2,
/

&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,
nested = .false., .true.,
/

&grib2
/

&chem
kemit = 1,
chem_opt = 201, 201,
bioemdt = 30, 30,
photdt = 30, 30,
chemdt = 0., 0.,
io_style_emissions = 2,
emiss_opt = 8, 8,
chem_in_opt = 1, 0,
phot_opt = 1, 1,
gas_drydep_opt = 0, 0,
aer_drydep_opt = 0, 0,
bio_emiss_opt = 1, 1,
dust_opt = 1,
dmsemis_opt = 1,
seas_opt = 0,
gas_bc_opt = 1, 1,
gas_ic_opt = 1, 1,
aer_bc_opt = 1, 1,
aer_ic_opt = 1, 1,
gaschem_onoff = 1, 1,
aerchem_onoff = 1, 1,
wetscav_onoff = 0, 0,
cldchem_onoff = 0, 0,
vertmix_onoff = 1, 1,
chem_conv_tr = 1, 1,
biomass_burn_opt = 3, 3,
plumerisefire_frq = 30, 0,
aer_ra_feedback = 0, 0,
have_bcs_chem = .false., .false.,
scale_fire_emiss = .true., .true.,
aer_op_opt = 1, 1,
opt_pars_out =1,
/

&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
----
Regards,
BChaimite
Best Regards,
Berny A. Chaimite
Berny Chaimite
 
Posts: 2
Joined: Fri Mar 31, 2017 7:17 pm
Location: Maputo

Return to Runtime Problems

Who is online

Users browsing this forum: No registered users and 2 guests

cron