Outside of lookup table bounds.

Discussions related to the use of ARWPost

Outside of lookup table bounds.

Postby wendell » Sun Oct 11, 2009 12:55 pm

Hello,

I'm trying to run the ARWpost, but the process was interupted. The shown message and my nemalist.ARWpost is attached below:
!!!!!!!!!!!!!!!!
ARWpost v2.1
!!!!!!!!!!!!!!!!

FOUND the following input files:
./wrfout_d01_2001-02-04_06:00:00
./wrfout_d01_2001-02-04_18:00:00

START PROCESSING DATA

Processing time --- 2001-02-04_06:00:00
Found the right date - continue

Processing time --- 2001-02-04_07:00:00
Found the right date - continue

Processing time --- 2001-02-04_08:00:00
Found the right date - continue

Processing time --- 2001-02-04_09:00:00
Found the right date - continue

Processing time --- 2001-02-04_10:00:00
Found the right date - continue

Processing time --- 2001-02-04_11:00:00
Found the right date - continue

Processing time --- 2001-02-04_12:00:00
Found the right date - continue

Processing time --- 2001-02-04_13:00:00
Found the right date - continue

Processing time --- 2001-02-04_14:00:00
Found the right date - continue

Processing time --- 2001-02-04_15:00:00
Found the right date - continue
Outside of lookup table bounds. prs,thte= 284.2150 198.7002
FORTRAN STOP

______________________________________________________________
&datetime
start_date = '2001-02-04_06:00:00',
end_date = '2001-02-04_18:00:00',
interval_seconds = 3600,
tacc = 0,
debug_level = 0,
/

&io
io_form_input = 2,
input_root_name = './wrfout*'
output_root_name = './test1'
plot = 'all_list'
fields = 'height,geopt,theta,tc,tk,td,td2,rh,rh2,umet,vmet,pressure,u10m,v10m,wdir,wspd,wd10,ws10,slp,mcape,mcin,lcl,lfc,cape,cin,dbz,max_dbz,clfr'
output_type = 'grads'
mercator_defs = .true.
/
split_output = .true.
frames_per_outfile = 12

output_type = 'grads'


plot = 'all'
plot = 'list'
plot = 'all_list'
! Below is a list of all available diagnostics
fields = 'height,geopt,theta,tc,tk,td,td2,rh,rh2,umet,vmet,pressure,u10m,v10m,wdir,wspd,wd10,ws10,slp,mcape,mcin,lcl,lfc,cape,cin,dbz,max_dbz,clfr'


&interp
interp_method = 0,
interp_levels = 1000.,950.,900.,850.,800.,750.,700.,650.,600.,550.,500.,450.,400.,350.,300.,250.,200.,150.,100.,
/
extrapolate = .true.

interp_method = 0, ! 0 is model levels, -1 is nice height levels, 1 is user specified pressure/height

interp_levels = 1000.,950.,900.,850.,800.,750.,700.,650.,600.,550.,500.,450.,400.,350.,300.,250.,200.,150.,100.,
interp_levels = 0.25, 0.50, 0.75, 1.00, 2.00, 3.00, 4.00, 5.00, 6.00, 7.00, 8.00, 9.00, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0,

Thanks in advance
wendell
 
Posts: 14
Joined: Tue Sep 30, 2008 3:18 pm

Re: Outside of lookup table bounds.

Postby anil » Sat Feb 27, 2010 2:42 am

I had come across the same problem.After lot of checks , i finally decided to reinstall ARWpost.The problem was resolved.
You may try and see if it works for you.
Anil
anil
 
Posts: 9
Joined: Wed May 27, 2009 2:13 am


Return to ARWPost

Who is online

Users browsing this forum: No registered users and 1 guest

cron